30000 BTU Ductless Air Conditioner, Heat Pump Mini Split 2.5 TON / 30,000 BTU

30000 BTU Ductless Mini Split AC: 20 SEER. Inverter w/ 30,000 BTU Heat Pump. Brand new for 2016, the 30000 BTU - 20 SEER Hyper HEAT Ductless Mini Split air conditioner and Heat Pump by Thermocore provides both cooling & heating in areas up to 1500 ft² large. Benefits of this series Include: I-Feel control, Anti-bacteria Filtration, intelligent Control Systems and comes fully charged with R410A. This system maintains heat functions to ambient temps down to 5F.

30,000 BTU INVERTER Heat Pump. 19.8 SEER - 11.5 HSPF - AHRI CERTIFIED. Indoor Unit - Air Handler. Digital Multi-function LCD Remote Control. Installation Kit with 15ft of lineset and wire. Pre-Charged w/ Eco-friendly R410A Refrigerant. Includes Anti-Fungus Bacterial Filter as Bonus.

HYPER HEAT FUNCTIONS MAINTAINS HEAT OUTPUT CAPACITY. I-Feel / Follow Me Technology Tracks Remote. Cross Flow Technology reduces noise output. Easy Maintenance - Panel Removes for Access.

Two-direction Air vane Evenly Distributes Air. 15 Ft Flared Copper Tubing.

15 Ft Electrical Wire - INDOOR>OUTDOOR. Wall Bracket for Indoor Unit.

Extend included 15 foot copper lineset and Wire to 26-36-50-75 feet. DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency.

The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor.

Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.

Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature.

The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables.

The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. Are still important steps in ensuring proper functioning of a split AC.

5 Year Compressor - 1 Year on all other Parts Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.

Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS!

SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order. Provides Flat even surface - Avoids debris obstruction.

25' Extension kit (3/8 x 5/8). Extend included 12 ft copper lineset to 25 ft. Mount your condenser at any height on an outdoor sidewall. Required when mounting air handler on Interior wall.

The item "30000 BTU Ductless Air Conditioner, Heat Pump Mini Split 2.5 TON / 30,000 BTU" is in sale since Friday, July 10, 2015. This item is in the category "Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Ductless Mini Split Systems". The seller is "hvac-usa" and is located in Warren, Michigan. This item can be shipped to United States, Canada.

BTU Cooling Rating: 30000
Number of Cool Speeds: Variable
Power Phase: 1 Phase
Energy Star: Not Compliant
Power Source: Corded Electric
Number of Zones: 1
Type: Split System
Features: Ductless
Refrigerant: R-410a
SEER Rating: 20
Timer Control: 24 Hours
Color: White
Energy Efficiency Ratio (EER): 11.1-12
MPN: 522551525125151
Number of Fan Motors: 1
Area Covered: Greater Than 1000 sq ft
Number of Heat Settings: Variable
Power: 2001-2500 W
BTU Heating Rating: 30000-39999 BTU
Brand: Thermocore Systems
Control Style: Remote Control
Compressor Type: Rotary & Impeller
Size: 2.5 tons
Cooling BTU/Hr: 30000
SEER: 20
Items Included: Drain Hose
Heating System: Heat Pump
Number of Compressors: 1
Voltage: 220 V